Skip to product information
Monitor Audio C2S 5" In-Ceiling Speaker
Sold asSingle
Impedance8Ω
Amp power35–130W
WarrantyLifetime
GrilleIncluded

Monitor Audio C2S 5" In-Ceiling Speaker

£349 £290.83 ex VAT
PackSingle

Request a quote

Monitor Audio Creator Series is sold by quotation. Choose your models and quantities, and we'll email you a quote with a secure link to pay online, normally within one working day.

Prefer to talk? Call 01284 634048 or email sales@ceiling-speakers.co.

You'll need an amplifier

These are passive speakers, so they need an amplifier to power them (8Ω, 35–130W recommended). Either of these will drive a pair and stream music from your phone.

Need a fire hood?

If the ceiling has a bedroom or other living space above it, or is part of an escape route, building regulations require each speaker to have a fire hood. Hoods also cut sound leaking into the room above.

Need speaker cable?

Allow about 10m per speaker for a typical run back to the amplifier. Webro 16/2 LSZH (low smoke, zero halogen) is the right cable for runs in ceilings and walls.

Webro 16/2 Speaker Cable, 2 Core 16AWG (1.31mm²) LSNH Violet
Webro 16/2 Speaker Cable2 Core 16AWG (1.31mm²) LSNH Violet
×

The Monitor Audio C2S is a compact two-way in-ceiling speaker designed for anyone wanting genuinely high-fidelity sound without a visible speaker cabinet. Its small 5" footprint makes it ideal for kitchens, living rooms, home offices, and multi-room audio setups, as well as commercial spaces such as shops, cafes and restaurants that need quality background music from a discreet source.

Why we like it

  • 5" RST II mid-bass driver delivers tight, accurate bass with minimal distortion
  • 1" C-CAM tweeter with UD Waveguide gives detailed, naturally dispersed treble
  • Quik-Link connector speeds up installation with a tool-free, secure cable fitting
  • Tri-Grip II mounting clamps firmly to ceiling boards for a rattle-free fit
  • Onboard corner switch and high-frequency control let you fine-tune the sound to the room

Installation notes

The C2S requires a 171mm cut-out and a mounting depth of 99mm, so check loft or ceiling void clearance before fitting. A pre-construction bracket (CS-B) is available for new-build projects where the ceiling cavity can be prepared in advance. For amplification, the C2S pairs well with a Sonos Amp or WiiM Amp for streaming-based multi-room setups, or any amplifier capable of delivering 35-130W RMS into 8 ohms.

Specifications

System Format 2-Way
Frequency Response (-6dB) 40 Hz - 30 kHz
Nominal Impedance 8 ohm
Minimum Impedance 6.8 ohm @ 150 Hz
Sensitivity 84 dB (2.83Vrms @ 1m)
Maximum Peak SPL 111 dB
Continuous Power Handling 65W RMS
Recommended Amplifier Power 35 - 130W RMS (into 8 ohm)
Drive Units 1 x 5" RST II mid-bass driver, 1 x 1" C-CAM tweeter
Crossover Frequency 2.5 kHz
Mounting Depth 99mm
Cut-Out Diameter 171mm
External Dimensions 201 x 201 x 103mm
Weight 1.5kg

Questions we get asked

Does it come with a grille?
Yes. Every ceiling and in-wall speaker we sell comes with its grille in the box. Manufacturer photos often show the speaker with the grille removed so you can see the drivers, but the grille is always included.
Will it fit my ceiling?
You'll need a 171mm cut-out and at least 99mm of depth behind the ceiling surface. The visible trim is 201mm across. Standard plasterboard ceilings with joists are usually fine; check for pipes, cables and insulation before cutting. Not sure? Send us a photo or plan and we'll check it for you.
Do I need an amplifier?
Yes. These are passive speakers, so they need an amplifier or AV receiver to drive them. They're rated at 8Ω with 35–130W recommended amplifier power. For most rooms a Sonos Amp or WiiM Amp is ideal: each drives a pair and streams from your phone. You can also buy a package with the amp included and save 5%.
Do I need a fire hood?
If there's a habitable room above (for example a bedroom), or the ceiling forms part of a fire escape route, Building Regulations require each speaker to be fire-rated, usually with a fire hood fitted over the back. The hood that fits this speaker is shown above, next to Add to cart. Hoods also cut sound travelling to the room above. See all fire hoods.
How many speakers do I need?
As a rule of thumb: a pair for most bedrooms, kitchens and living rooms up to about 20m², two pairs for large open-plan spaces, and a single stereo speaker (T2 / stereo models) for small rooms like en-suites. For home cinema, use 5 or 7 speakers plus a subwoofer. Our free design service will plan positions and sizes from your floorplan.
Can I return it?
Yes. Unused items can be returned within 30 days of delivery, and every product carries the full manufacturer warranty. Returns & warranty.

You may also like