Monitor Audio C2L-T2X 9" In-Ceiling Speaker
Request a quote
Monitor Audio Creator Series is sold by quotation. Choose your models and quantities, and we'll email you a quote with a secure link to pay online, normally within one working day.
These are passive speakers, so they need an amplifier to power them (4–8Ω, 60–240W recommended). Either of these will drive a pair and stream music from your phone.
If the ceiling has a bedroom or other living space above it, or is part of an escape route, building regulations require each speaker to have a fire hood. Hoods also cut sound leaking into the room above.
An MDF back box encloses the speaker for tighter, more consistent bass and stops sound leaking into the room above or the ceiling void. One per speaker.
Stereo from a single speaker needs a 4-core cable (left and right channels on one run). Allow about 10m back to the amplifier. Webro 16/4 LSZH (low smoke, zero halogen) is the right cable for runs in ceilings and walls.
The Monitor Audio C2L-T2X is a large-format in-ceiling speaker built for rooms that demand serious scale and flexibility. Whether you're fitting out a spacious living room, a home cinema, or a commercial space such as a restaurant or shop, this single speaker can be configured to suit the application thanks to its switchable operating modes.
Why we like it
- 9" RST II dual-coil bass driver delivers deep, distortion-free low end
- Twin 1.25" C-CAM tweeters with UD Waveguide spread detailed treble evenly around the room
- Three selectable modes: Cinema Mono FX (di-pole), Mono Wide Dispersion (bi-pole) and Single Speaker Stereo
- Quik-Link connector and Tri-Grip II fixing system make for a quick, secure install
- Optional square grille offers an alternative finish to suit the room's decor
Installation notes
The C2L-T2X requires a 248mm diameter cut-out and a mounting depth of 99mm, so check ceiling void clearance before installing. In Stereo mode it presents an 8 ohm load, ideal for pairing with a compact streaming amplifier such as a Sonos Amp or WiiM Amp; in Mono mode it runs at 4 ohm and benefits from a higher-powered amplifier to make the most of its 240W handling.
Specifications
| System Format | 2-Way |
| Frequency Response (-6dB) | 30Hz - 30kHz |
| Nominal Impedance | 4 ohm (Mono) / 8 ohm (Stereo) |
| Sensitivity | 88dB (2.83Vrms @ 1m) |
| Max Peak SPL | 117dB (Mono) |
| Continuous Power Handling | 240W (Mono) / 2 x 30-120W (Stereo) |
| Recommended Amplifier Power | 60-240W (Mono) / 2 x 60-240W (Stereo) |
| Drive Units | 1 x 9" RST II bass driver, 2 x 1.25" C-CAM tweeters |
| Crossover Frequency | 2kHz |
| Mounting Depth | 99mm |
| Cut-Out Diameter | 248mm |





