KEF Ci160QR 6.5" Uni-Q In-Ceiling Speaker

KEF Ci160QR 6.5" Uni-Q In-Ceiling Speaker

Single
£219
Skip to product information
KEF Ci160QR 6.5" Uni-Q In-Ceiling Speaker
Impedance8Ω
Amp power10–125W
Warranty2 years
GrilleIncluded

KEF Ci160QR 6.5" Uni-Q In-Ceiling Speaker

£219 £182.50 ex VAT
Multi-buy savings
Buy 2+£209 eachsave £10 each
Buy 4+£199 eachsave £20 each
Discount applied automatically in your basket.
Need a fire hood?

If the ceiling has a bedroom or other living space above it, or is part of an escape route, building regulations require each speaker to have a fire hood. Hoods also cut sound leaking into the room above.

Need speaker cable?

Allow about 10m per speaker for a typical run back to the amplifier. Webro 16/2 LSZH (low smoke, zero halogen) is the right cable for runs in ceilings and walls.

Webro 16/2 Speaker Cable, 2 Core 16AWG (1.31mm²) LSNH Violet
Webro 16/2 Speaker Cable2 Core 16AWG (1.31mm²) LSNH Violet
×
PackSingle

The KEF Ci160QR is a premium in-ceiling speaker ideal for living rooms, kitchens, bathrooms and multi-room installations where discreet, high-fidelity sound matters. Built around KEF's renowned Uni-Q driver array, it delivers detailed, room-filling audio from a remarkably slim ceiling footprint, making it a popular choice for both music lovers and home cinema enthusiasts.

Why we like it

  • Uni-Q driver places the tweeter at the acoustic centre of the woofer for even, natural sound dispersion
  • Tangerine Waveguide refines treble detail and widens the sweet spot
  • Ultra Thin Bezel design keeps the visible trim to a minimum for a near-invisible finish
  • Paintable magnetic grille allows seamless colour matching to any ceiling
  • IP64 rated, so it's equally at home in bathrooms, kitchens or covered outdoor areas

Installation notes

The Ci160QR requires a 196mm cut-out and a mounting depth of 91mm, so check ceiling cavity clearance before installing. As a passive speaker, it needs an amplifier such as a Sonos Amp or WiiM Amp to drive it; its 8 ohm impedance and 10-125W recommended power range make it compatible with most multi-room and AV amplifiers. Gold-plated spring-loaded binding posts make for quick, reliable cable connections during install.

Specifications

Driver 160mm Uni-Q with 19mm aluminium dome tweeter
Frequency Response 38Hz - 34kHz (±6dB)
Sensitivity 89dB (2.83V/1m)
Impedance 8 Ohms
Recommended Power 10 - 125W
Overall Dimensions 234.6mm diameter x 98mm depth
Cut-Out Diameter 196mm
Mounting Depth 91mm
IP Rating IP64

You may also like