KEF Ci160.2CS 6.5" Square In-Ceiling Speaker
These are passive speakers, so they need an amplifier to power them (8Ω, 10–100W recommended). Either of these will drive a pair and stream music from your phone.
If the ceiling has a bedroom or other living space above it, or is part of an escape route, building regulations require each speaker to have a fire hood. Hoods also cut sound leaking into the room above.
Allow about 10m per speaker for a typical run back to the amplifier. Webro 16/2 LSZH (low smoke, zero halogen) is the right cable for runs in ceilings and walls.
The KEF Ci160.2CS is a 6.5" square in-ceiling speaker from KEF's C Series, designed for clean, flush installs in living rooms, kitchens, bathrooms and home cinemas. Its shallow 84.5mm mounting depth lets it fit where many 6.5" speakers won't, and its IP64 rating means it handles steamy bathrooms and splashes with ease.
Why we like it
- KEF's Uni-Q driver array places the 16mm aluminium dome tweeter at the acoustic centre of the 160mm woofer, giving smooth, even sound across the whole room
- Tangerine waveguide widens high-frequency dispersion to 120°, so fewer speakers cover more space
- IP64 certified with weather-resistant, UV-protected components: ideal for bathrooms, kitchens and covered outdoor areas
- Ultra-Thin Bezel and paintable magnetic grille (with paint shield) disappear into any ceiling
- Uses KEF's universal 194mm square cut-out shared by all 160mm square models, so it's easy to upgrade later
Installation notes
Allow a square cut-out of 194 x 194mm and a mounting depth of 84.5mm. The overall size is 223 x 223mm. An optional KEF RIF160S rough-in frame and RNC160S rear enclosure are available. As a passive 8 ohm speaker, the Ci160.2CS pairs well with a Sonos Amp or WiiM Amp for streaming multi-room setups, or with a traditional AV receiver.
Specifications
| Driver | 160mm (6.5") Uni-Q with 16mm aluminium dome tweeter |
| Frequency Response | 52 Hz - 20 kHz (±6 dB) |
| Sensitivity | 89 dB (2.83V/1m) |
| Max SPL | 104 dB |
| Impedance | 8 Ohms |
| Recommended Amplifier Power | 10 - 100 W |
| Coverage | 120° |
| Overall Dimensions | 223 x 223 mm |
| Mounting Depth | 84.5 mm |
| Cut-Out | 194 x 194 mm |
| Certification | IP64 |
| Weight | 1.7 kg |



