Bowers & Wilkins CCM665 6" In-Ceiling Speakers (Pair)
These are passive speakers, so they need an amplifier to power them (8Ω, 25–130W recommended). Either of these will drive a pair and stream music from your phone.
If the ceiling has a bedroom or other living space above it, or is part of an escape route, building regulations require each speaker to have a fire hood. Hoods also cut sound leaking into the room above.
Allow about 10m per speaker for a typical run back to the amplifier (this listing is a pair). Webro 16/2 LSZH (low smoke, zero halogen) is the right cable for runs in ceilings and walls.
The Bowers & Wilkins CCM665 is a premium two-way in-ceiling speaker built for anyone who wants outstanding sound without a visible speaker in the room. Drawing on the engineering heritage of B&W's renowned studio monitors, it's ideally suited to kitchens, living rooms, home offices and open-plan spaces where discretion matters as much as performance.
Why we like it
- 150mm woven glass fibre bass/midrange driver for tight, controlled bass
- 25mm soft dome tweeter delivers smooth, detailed treble
- Wide 45Hz-35kHz frequency range for genuinely full-range sound
- QuickDogs tool-free mounting system speeds up installation
- Slim, paintable magnetic grille blends into any ceiling finish
Installation notes
The CCM665 requires a 202mm cut-out and sits within a 240mm frame diameter, with 133mm depth behind the surface. For projects needing fire or acoustic isolation, the optional BB6C back box or PMKC6 pre-mount kit can be fitted before plastering. With an 8 ohm nominal impedance and 25-130W handling per channel, these speakers pair well with multi-room amplifiers such as the Sonos Amp or a WiiM Amp for whole-home audio control.
Specifications
| Drive Units | 25mm soft dome tweeter, 150mm woven glass fibre bass/midrange |
| Frequency Range (-6dB) | 45Hz - 35kHz |
| Sensitivity | 87dB (2.83V, 1m) |
| Nominal Impedance | 8 ohm (minimum 4.5 ohm) |
| Power Handling | 25 - 130W per channel |
| Frame Diameter | 240mm |
| Cut-Out Diameter | 202mm |
| Depth Behind Surface | 133mm |
| Protrusion | 4mm |
| Warranty | 5 years |



