KEF Ci200ER 8" Ceiling Speakers (Pair)
These are passive speakers, so they need an amplifier to power them (8Ω, 10–125W recommended). Either of these will drive a pair and stream music from your phone.
If the ceiling has a bedroom or other living space above it, or is part of an escape route, building regulations require each speaker to have a fire hood. Hoods also cut sound leaking into the room above.
Allow about 10m per speaker for a typical run back to the amplifier (this listing is a pair). Webro 16/2 LSZH (low smoke, zero halogen) is the right cable for runs in ceilings and walls.
The KEF Ci200ER is the flagship 8" model in KEF's Ci-E ceiling speaker range, built for larger living rooms, open-plan kitchens, and commercial spaces that demand powerful, high-fidelity sound without a visible speaker footprint. Sold as a pair, it combines serious low-end output with KEF's renowned Uni-Q driver array for a genuinely immersive listening experience from virtually anywhere in the room.
Why we like it
- 8" low-frequency driver delivers deep, authoritative bass for larger spaces
- Uni-Q driver array places the tweeter at the acoustic centre of the woofer for consistent sound dispersion
- Ultra-Thin Bezel (UTB) trim sits almost flush with the ceiling for a discreet finish
- Weather-resistant build suits moisture-prone rooms such as kitchens and bathrooms
- Magnetic, paintable grille can be colour-matched to any ceiling
Installation notes
Each speaker requires a 240mm cut-out and a mounting depth of approximately 97.2mm, with overall dimensions of 289.6mm diameter x 103.3mm deep. Ceiling thickness should be between 6mm and 37mm. With an 8 Ohm impedance and recommended amplifier power of 10-125W, the Ci200ER pairs well with multi-room amplifiers such as the Sonos Amp or a WiiM Amp for streaming-based installations.
Specifications
| Nominal Impedance | 8 Ohms |
| Sensitivity | 90dB (2.83V/1m) |
| Frequency Response | 45Hz - 20kHz (±6dB) |
| Crossover Frequency | 2.8kHz |
| Drive Units | LF: 200mm (8") HF: 16mm (0.6") aluminium dome tweeter |
| Recommended Amplifier Power | 10-125W |
| Overall Dimensions | Ø289.6mm x Depth 103.3mm |
| Cut-Out Dimensions | Ø240mm |
| Mounting Thickness | 6mm-37mm |
| Mounting Depth From Surface | 97.2mm |
| Net Weight (Each) | 1.6kg |
| Grille Type | Magnetic, paintable |



