KEF Ci160QL 6.5" Rectangular In-Wall/In-Ceiling Speaker
These are passive speakers, so they need an amplifier to power them (8Ω, 10–125W recommended). Either of these will drive a pair and stream music from your phone.
Allow about 10m per speaker for a typical run back to the amplifier. Webro 16/2 LSZH (low smoke, zero halogen) is the right cable for runs in ceilings and walls.
The KEF Ci160QL is a 6.5" rectangular in-wall and in-ceiling speaker built around KEF's acclaimed Uni-Q driver array, making it a strong choice for home cinema surrounds, multi-room audio and general background listening throughout the home. Its ultra-thin bezel and flat magnetic grille allow it to disappear into a wall or ceiling, keeping the focus on the room rather than the hardware.
Why we like it
- Uni-Q point-source driver places the tweeter at the acoustic centre of the woofer for consistent, wide-area coverage
- Tangerine waveguide sharpens high-frequency detail and dispersion
- Computer-optimised trim ring aids natural, clear midrange
- Ultra-thin bezel and magnetic grille give a discreet, paintable finish
- Quick-clip fixing system speeds up installation across different wall and ceiling board thicknesses
Installation notes
Overall dimensions are 303 x 223 x 97.5mm, with a rectangular cut-out of 274 x 194mm and a mounting depth of 91mm, so check joist and cavity depth before cutting. As a passive design it needs an external amplifier rated between 10-125W into 8 ohms; a Sonos Amp or WiiM Amp is a sensible match for multi-room or home cinema use, and pairing with a subwoofer is recommended for fuller bass in larger rooms. Optional RIF160L rough-in frame or RNC160L rear enclosure accessories can improve acoustic performance and ease of fitting.
Specifications
| Impedance | 8 ohm |
| Sensitivity | 89dB (2.83V/1m) |
| Frequency Response | 38Hz-34kHz (±6dB, open-backed) |
| Crossover Frequency | 3.0kHz |
| Drivers | 160mm LF woofer + 19mm Uni-Q tweeter |
| Recommended Amplifier | 10-125W |
| Dimensions (H x W x D) | 303 x 223 x 97.5mm |
| Cut-out Size | 274 x 194mm |
| Mounting Depth | 91mm |
| Weight | 2.05kg |


