Sonos Sonance 8" In-Ceiling Speakers (Pair)
Sonos Sonance 8" In-Ceiling Speakers (Pair)
Allow about 10m per speaker for a typical run back to the amplifier (this listing is a pair). Webro 16/2 LSZH (low smoke, zero halogen) is the right cable for runs in ceilings and walls.
The Sonos Architectural by Sonance 8" In-Ceiling Speakers are a pair of flush-mounted, bezel-less speakers designed and tuned in collaboration with Sonance, delivering natural, room-filling sound while remaining discreet. They suit living rooms, kitchens and multi-room installations where a seamless ceiling finish is desired.
Why we like it
- 8 inch polypropylene woofer paired with a 1.2 inch tweeter for a wide, even frequency response
- Flush, bezel-less grille can be painted to match the ceiling for a discreet finish
- Optimised for use with Sonos Amp, unlocking Trueplay room tuning and custom DSP optimisation
- 100° nominal coverage angle helps fill more of the room from a single pair
Installation notes
Each speaker requires a cut-out diameter of 257 mm and a mounting depth of 135 mm behind the ceiling, so check joist spacing and void depth before installation. These are passive 8 ohm speakers, optimised for use with Sonos Amp but also compatible with any suitable amplifier; Sonos recommends 16ga or larger speaker wire. Powering via Sonos Amp also unlocks Trueplay tuning and Optimise Sonos Speakers DSP features via the Sonos app.
Specifications
| Low Frequency Driver | One 8" polypropylene woofer |
| High Frequency Driver | One 1.2" (30 mm) tweeter |
| Frequency Range | 29 Hz-20 kHz ±3dB (with DSP) |
| Nominal Impedance | 8 Ohms |
| Sensitivity (2.83V/1M) | 86dB SPL |
| Max SPL | 113dB @ 1m |
| Nominal Coverage | 100° axisymmetric |
| Overall Diameter | 283.5 mm |
| Mounting Depth | 135 mm |
| Cutout Diameter | 257 mm |
| Weight | 4.1 kg each |
| Colour | White |
| Finish | Matte |
| Power Handling (Optimised for Sonos Amp) | 225 watts maximum |