Monitor Audio Climate CL2 S Outdoor Speakers (Pair), White
These are passive speakers, so they need an amplifier to power them (6Ω, 150W recommended). Either of these will drive a pair and stream music from your phone.
Outdoor runs need burial-grade cable. Allow about 10m per speaker for the pair. QED QX16/2 PE has a water and UV resistant jacket and can be buried without conduit.
The Monitor Audio Climate CL2 S is a compact two-way, wall-mountable outdoor speaker, supplied as a pair in white. Its small footprint and IP66 rating make it well suited to patios, balconies and other covered or exposed exterior spaces, as well as versatile indoor installations such as bathrooms or kitchens.
Why we like it
- High-fidelity voicing from the Monitor Audio acoustic team, carried through to a compact outdoor format
- Auxiliary Bass Radiator (ABR) extends bass output, particularly beneficial in open-air placement
- 1 x 100mm C-CAM RST II bass-mid driver paired with a 25mm C-CAM black dome tweeter for detailed two-way performance
- IP66-rated ABS cabinet construction for durability in exposed locations
- Innovative die-cast 'Quik-Link' bracket system for straightforward wall mounting
Installation notes
The Climate CL2 S is a wall-mounted speaker rather than a flush ceiling or in-wall unit, fitted using the supplied die-cast 'Quik-Link' bracket system; no cut-out or in-wall mounting depth applies. External dimensions with all accessories fitted are 247 x 140 x 217mm (H x W x D), so allow adequate wall space and clearance for the bracket. With a nominal impedance of 6Ω and a recommended amplifier power of up to 150W RMS, pair with an amplifier capable of driving this load comfortably within that power range. Speakers are sold and should be installed in pairs.
Specifications
| System Format | 2-Way |
| Sensitivity (2.83V @ 1m, Installed) | 84 dB |
| Recommended Amplifier Power (RMS, Music Signal) | 150 W |
| Continuous Power Handling (CTA 426-B) | 70 W |
| Nominal Impedance | 6 Ohms |
| Minimum Impedance (20Hz to 20kHz) | 4.9 Ohms |
| Drive Unit Complement | 1 x 100mm (4") C-CAM RST II bass-mid driver; 1 x 25mm C-CAM black dome tweeter |
| Frequency Response, On-Wall (-6dB) | 56Hz – 30kHz |
| Maximum Peak SPL (AES75, Z-weighted) | 108 dB |
| Bass Alignment | Auxiliary Bass Radiator |
| Crossover Frequency | 3.3 kHz |
| IP Rating | IP66 |
| External Dimensions (H x W x D, with accessories fitted) | 247 x 140 x 217 mm |
| Weight (each) | 2.7 kg |
| Finish | White |
| Sold as | Pair |


