Monitor Audio Climate CL2 M Outdoor Speakers (Pair), White
These are passive speakers, so they need an amplifier to power them (6Ω, 200W recommended). Either of these will drive a pair and stream music from your phone.
Outdoor runs need burial-grade cable. Allow about 10m per speaker for the pair. QED QX16/2 PE has a water and UV resistant jacket and can be buried without conduit.
The Monitor Audio Climate CL2 M is a mid-sized, two-way, wall-mountable outdoor speaker finished in White, supplied as a pair. Rated to IP66, it is equally suited to garden and patio installations as it is to interior spaces where a discreet wall-mounted speaker is required.
Why we like it
- Two-way design with a 165 mm (6") C-CAM RST II bass-mid driver and 25 mm C-CAM black dome tweeter for detailed, dynamic sound
- Auxiliary Bass Radiator (ABR) extends bass output, particularly beneficial for external placement
- IP66 rated, robust ABS cabinet construction for reliable outdoor performance
- Innovative die-cast 'Quik-Link' bracket system for straightforward wall mounting
- Voiced and engineered by the Monitor Audio acoustic team to the same standards as their premium indoor loudspeakers
Installation notes
The Climate CL2 M is wall-mounted using the supplied die-cast 'Quik-Link' bracket system rather than being recessed into a ceiling or wall, so no cut-out dimensions apply. External dimensions with all accessories fitted are 332 x 190 x 240 mm (H x W x D). Each speaker has a nominal impedance of 6 ohms (minimum 4.8 ohms from 20Hz to 20kHz) and a recommended amplifier power of 200W RMS on music signal, with continuous power handling of 100W; pair with an amplifier capable of driving 6 ohm loads. Supplied and sold as a pair.
Specifications
| Brand | Monitor Audio |
| Series | Climate Series 3G |
| Model | Climate CL2 M |
| Finish | White |
| System Format | 2-Way |
| Drive Units | 1 x 165 mm (6") C-CAM RST II bass-mid driver, 1 x 25 mm C-CAM black dome tweeter |
| Bass Alignment | Auxiliary Bass Radiator |
| Sensitivity (2.83V @ 1m, Installed) | 85.5 dB |
| Nominal Impedance | 6 Ohms |
| Minimum Impedance (20Hz–20kHz) | 4.8 Ohms |
| Recommended Amplifier Power (RMS, Music Signal) | 200 W |
| Continuous Power Handling (CTA 426-B) | 100 W |
| Frequency Response, On-Wall (-6dB) | 42Hz – 30kHz |
| Maximum Peak SPL (AES75, Z-weighted) | 110 dB |
| Crossover Frequency | 2.6 kHz |
| IP Rating | IP66 |
| External Dimensions (H x W x D) | 332 x 190 x 240 mm |
| Weight (each) | 4.1 kg |
| Sold as | Pair |


