Monitor Audio Climate CL2 M Outdoor Speakers (Pair), Black
These are passive speakers, so they need an amplifier to power them (6Ω, 200W recommended). Either of these will drive a pair and stream music from your phone.
Outdoor runs need burial-grade cable. Allow about 10m per speaker for the pair. QED QX16/2 PE has a water and UV resistant jacket and can be buried without conduit.
The Monitor Audio Climate CL2 M is a mid-sized, two-way, wall-mountable speaker engineered to deliver signature Monitor Audio high-fidelity sound both outdoors and in. Supplied as a pair in black, it suits patios, gardens, porches and covered outdoor living spaces, as well as bathrooms or other interior rooms where a weatherproof build is beneficial.
Why we like it
- Two-way design with an Auxiliary Bass Radiator (ABR) to extend bass output, particularly beneficial for external placement
- 1 x 165 mm (6") C-CAM RST II bass-mid driver paired with a 1 x 25 mm (1") C-CAM black dome tweeter
- IP66 rated for robust outdoor weatherproofing
- Durable ABS cabinet construction with a clean, contemporary finish
- Innovative die-cast 'Quik-Link' bracket system for straightforward wall mounting
Installation notes
Climate CL2 M is a wall-mountable speaker rather than a flush ceiling/in-wall model, fitted using the supplied die-cast 'Quik-Link' bracket system; no cut-out is required. Overall dimensions with all accessories fitted are 332 x 190 x 240 mm (H x W x D). Pair with an amplifier capable of delivering up to 200W RMS per channel into the speaker's 6Ω nominal impedance (minimum impedance 4.8Ω across 20Hz–20kHz) for best results.
Specifications
| System Format | 2-Way |
| IP Rating | IP66 |
| Sensitivity (2.83V @ 1m, Installed) | 85.5 dB |
| Recommended Amplifier Power (RMS, Music Signal) | 200 W |
| Continuous Power Handling (CTA 426-B) | 100 W |
| Nominal Impedance | 6 Ohms |
| Minimum Impedance (20Hz–20kHz) | 4.8 Ohms |
| Drive Unit Complement | 1 x 165 mm (6") C-CAM RST II bass-mid driver; 1 x 25 mm C-CAM black dome tweeter |
| Frequency Response, On-Wall (-6dB) | 42Hz – 30kHz |
| Maximum Peak SPL (AES75, Z-weighted) | 110 dB |
| Bass Alignment | Auxiliary Bass Radiator |
| Crossover Frequency | 2.6 kHz |
| External Dimensions (H x W x D, with all accessories fitted) | 332 x 190 x 240 mm |
| Weight (each) | 4.1 kg |
| Finish | Black |
| Sold as | Pair |


