Monitor Audio Climate CL2 S Outdoor Speakers (Pair), Black
These are passive speakers, so they need an amplifier to power them (6Ω, 150W recommended). Either of these will drive a pair and stream music from your phone.
Outdoor runs need burial-grade cable. Allow about 10m per speaker for the pair. QED QX16/2 PE has a water and UV resistant jacket and can be buried without conduit.
The Monitor Audio Climate CL2 S is a compact two-way, wall-mountable outdoor speaker from the Climate Series 3G range, finished in black and sold as a pair. Its diminutive cabinet belies a genuinely high-fidelity performance, making it a versatile choice for patios, terraces and other exterior listening areas, as well as weather-protected interior spaces.
Why we like it
- Two-way design with a 100mm (4") C-CAM RST II bass-mid driver and 25mm (1") C-CAM black dome tweeter
- Auxiliary Bass Radiator (ABR) extends bass output, particularly well suited to external placement
- IP66 rated for robust outdoor weather resistance
- Innovative die-cast 'Quik-Link' bracket system for straightforward wall mounting
- Voiced and engineered by the Monitor Audio acoustic team to the same standards as their premium loudspeakers
Installation notes
The Climate CL2 S is a wall-mounted speaker (not a ceiling/in-wall model), fitted using the supplied die-cast 'Quik-Link' bracket system rather than a cut-out, so no ceiling aperture or recessed mounting depth applies. Overall external dimensions with all accessories fitted are 247 x 140 x 217mm (H x W x D). Nominal impedance is 6Ω, with a minimum impedance of 4.9Ω across 20Hz–20kHz, so pair with an amplifier capable of driving a 6Ω load. Monitor Audio recommends an amplifier power of up to 150W RMS for this model. Supplied and sold in pairs.
Specifications
| System Format | 2-Way |
| Drive Units | 1 x 100mm (4") C-CAM RST II bass-mid driver; 1 x 25mm (1") C-CAM black dome tweeter |
| Bass Alignment | Auxiliary Bass Radiator |
| IP Rating | IP66 |
| Sensitivity (2.83V @ 1m, Installed) | 84 dB |
| Recommended Amplifier Power (RMS, Music Signal) | 150 W |
| Continuous Power Handling (CTA 426-B) | 70 W |
| Nominal Impedance | 6 Ohms |
| Minimum Impedance (20Hz–20kHz) | 4.9 Ohms |
| Frequency Response, On-Wall (-6dB) | 56Hz – 30kHz |
| Maximum Peak SPL (AES75, Z-weighted) | 108 dB |
| Crossover Frequency | 3.3 kHz |
| External Dimensions (H x W x D, with accessories fitted) | 247 x 140 x 217 mm |
| Weight (each) | 2.7 kg |
| Finish | Black |
| Sold as | Pair |


