Webro 14/4 Speaker Cable, 4 Core 14AWG (2.11mm²) LSNH Violet

Webro 14/4 is a 4-core, 14AWG installation speaker cable designed for permanent fixed wiring behind walls and ceilings. It's a good choice for anyone running stereo pairs or two speakers from a single cable run, particularly where longer cable lengths are needed between amplifier and speakers.

Why we like it

• 14AWG (2.11mm²) copper conductors, suited to longer speaker runs where a lighter gauge would introduce excessive resistance
• 4-core construction allows left and right channels, or two separate speakers, to be wired from one cable
• 99.999% oxygen-free plain copper conductors for consistent signal transfer
• LSNH (Low Smoke, Non-Halogen) insulation and sheath, classified Eca to BS EN 50575 for fixed installation use
• Supplied cut to length from the drum, so you only take what the run requires

Good to know

This cable suits ceiling and in-wall speaker installations where a single 4-core run is being used to feed two speakers or a stereo pair, saving a second cable run back to the amplifier position. As a general guide, 16AWG is adequate for typical domestic runs, 14AWG (as here) is recommended for longer runs, and 12AWG is best reserved for very long runs or low-impedance, high-power home cinema setups. Because this is Eca-rated LSNH cable, it's designed specifically for fixed installation within walls, ceilings and voids rather than for portable or exposed use. Available cut to length in 10m, 20m, 30m or 50m lengths.

Specifications