{"title":"Accessories","description":"\u003cp\u003eFire hoods, speaker cable, rack kits and wireless sub kits: everything you need to finish the install.\u003c\/p\u003e","products":[{"product_id":"speakercraft-wireless-subwoofer-kit-transmitter-and-receiver","title":"SpeakerCraft Wireless Subwoofer Kit (Transmitter \u0026 Receiver)","description":"\u003cp\u003eThe SpeakerCraft Wireless Subwoofer Kit lets you position a subwoofer wherever it sounds best, without running a cable back to the source. The kit comprises a transmitter and a receiver that mounts directly onto the rear panel of a compatible SpeakerCraft SDSi subwoofer, making it ideal for installations where cabling to the optimal bass location simply isn't practical.\u003c\/p\u003e\n\u003ch3\u003eWhy we like it\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e5GHz FHSS wireless technology gives a robust, interference-free connection\u003c\/li\u003e\n\u003cli\u003eTransmission range of up to 30ft (10m) for flexible subwoofer placement\u003c\/li\u003e\n\u003cli\u003eOne transmitter supports up to four receivers, ideal for multi-subwoofer setups\u003c\/li\u003e\n\u003cli\u003eReceiver powers directly from the subwoofer's USB port, so no separate power supply is needed\u003c\/li\u003e\n\u003cli\u003eDesignated mounting point on compatible SpeakerCraft subwoofers for a neat, secure fit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation notes\u003c\/h3\u003e\n\u003cp\u003eThe receiver bolts onto the rear panel of a compatible SDSi subwoofer and is powered by the subwoofer's USB 5V output, so no additional mains power is required for the receiver itself. The transmitter connects at the A\/V source end. Indoor use only, with a maximum range of around 30ft (10m); each transmitter can pair with up to four receivers for multi-subwoofer installations. Individual receivers are available separately for expanding beyond the supplied kit.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003eModulation\u003c\/td\u003e\n\u003ctd\u003e5 GHz Frequency Hopping; QPSK (DSSS) digital radio\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Frequency\u003c\/td\u003e\n\u003ctd\u003e5.150–5.250 GHz, 5.725–5.875 GHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTransmission Power\u003c\/td\u003e\n\u003ctd\u003e9 dBm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency Response\u003c\/td\u003e\n\u003ctd\u003e10 Hz – 900 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChannel Width\u003c\/td\u003e\n\u003ctd\u003e\u0026lt;22 MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLatency\u003c\/td\u003e\n\u003ctd\u003e\u0026lt;20 ms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRange\u003c\/td\u003e\n\u003ctd\u003e30ft \/ 10m Max, Indoor Use Only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eS\/N Ratio\u003c\/td\u003e\n\u003ctd\u003e84dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Input Signal\u003c\/td\u003e\n\u003ctd\u003e1.84V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTransmitter Dimensions\u003c\/td\u003e\n\u003ctd\u003e36.8mm x 98.6mm x 88mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReceiver Dimensions\u003c\/td\u003e\n\u003ctd\u003e34.3mm x 68.4mm x 88mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Receivers per Transmitter\u003c\/td\u003e\n\u003ctd\u003eUp to 4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower\u003c\/td\u003e\n\u003ctd\u003eUSB Powered (via subwoofer's USB port)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"SpeakerCraft","offers":[{"title":"Default Title","offer_id":55365796495699,"sku":"SC-WIR-KIT-INT","price":249.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1115\/1323\/9891\/files\/SC-WIR-SUB-KIT-US_main-10.png?v=1791970918"},{"product_id":"speakercraft-wireless-subwoofer-receiver","title":"SpeakerCraft Wireless Subwoofer Receiver","description":"\u003cp\u003eThe SpeakerCraft SC-WIR-RX-INT is an additional wireless subwoofer receiver designed to pair with the SpeakerCraft wireless subwoofer transmitter, giving installers the freedom to site a subwoofer wherever it sounds best without running cables. It's a practical addition for multi-room or multi-subwoofer installations where extra receivers are needed.\u003c\/p\u003e\u003ch3\u003eWhy we like it\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRemoves the need for a cable run between A\/V source and subwoofer\u003c\/li\u003e\n\u003cli\u003eEach transmitter supports up to four receivers, ideal for multi-sub setups\u003c\/li\u003e\n\u003cli\u003e5 GHz FHSS wireless technology for a robust, interference-free connection\u003c\/li\u003e\n\u003cli\u003eLow latency of under 20ms keeps bass tightly synced with the main system\u003c\/li\u003e\n\u003cli\u003eUSB powered directly from the subwoofer, with a designated mounting solution\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation notes\u003c\/h3\u003e\u003cp\u003eThe receiver connects directly to the subwoofer and is powered via the subwoofer's USB port (SDSi USB 5V), so no separate power supply is required. It mounts using the subwoofer's built-in mounting solution and communicates wirelessly with the transmitter over a range of up to 10m (30ft), indoor use only. Up to four receivers can be used with a single transmitter for multiple subwoofer setups.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003eModulation\u003c\/td\u003e\n\u003ctd\u003e5 GHz Frequency Hopping; QPSK (DSSS) digital radio\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Frequency\u003c\/td\u003e\n\u003ctd\u003e5.150-5.250 GHz, 5.725-5.875 GHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTransmission Power\u003c\/td\u003e\n\u003ctd\u003e9 dBm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency Response\u003c\/td\u003e\n\u003ctd\u003e10 Hz – 900 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChannel Width\u003c\/td\u003e\n\u003ctd\u003e\u0026lt;22 MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLatency\u003c\/td\u003e\n\u003ctd\u003e\u0026lt;20 ms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eS\/N Ratio\u003c\/td\u003e\n\u003ctd\u003e84dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRange\u003c\/td\u003e\n\u003ctd\u003e30ft \/ 10m (Indoor Only)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Input Signal\u003c\/td\u003e\n\u003ctd\u003e1.84V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions (Receiver)\u003c\/td\u003e\n\u003ctd\u003e34.3 × 68.4 × 88mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower\u003c\/td\u003e\n\u003ctd\u003eUSB 5V (SDSi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"SpeakerCraft","offers":[{"title":"Default Title","offer_id":55365796528467,"sku":"SC-WIR-RX-INT","price":149.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1115\/1323\/9891\/files\/sc-wir-rx-int-01.png?v=1791970952"},{"product_id":"webro-16-2-speaker-cable-2-core-16awg-1-31mm2-lsnh-violet","title":"Webro 16\/2 Speaker Cable, 2 Core 16AWG (1.31mm²) LSNH Violet","description":"\u003cp\u003eWebro 16\/2 Speaker Cable is an installation cable with 99.999% oxygen-free plain copper conductors, designed for permanent routing to in-ceiling or in-wall speakers. It suits anyone wiring a single speaker per cable run, whether for a two-channel system or a multi-room setup, and is supplied with a low smoke, non-halogen sheath for safer fixed installation.\u003c\/p\u003e\n\u003ch3\u003eWhy we like it\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e99.999% oxygen-free plain copper conductors for reliable signal transfer\u003c\/li\u003e\n\u003cli\u003eLow Smoke Non-Halogen (LSNH) insulation and sheath, built for fixed installation\u003c\/li\u003e\n\u003cli\u003eUKCA CPR classification Eca to BS EN 50575, with flame retardancy to BS EN 60332-1-2\u003c\/li\u003e\n\u003cli\u003eLow smoke emission (BS EN 61034-2) and low halogen gas release (BS EN 60754-1\u0026amp;2)\u003c\/li\u003e\n\u003cli\u003eSupplied cut to length from the drum, so you only buy the length you need\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\n\u003cp\u003eThis is a 2-core cable, so you'll need one cable run per speaker; if you're wiring a stereo pair or two speakers from a single source point, a 4-core cable would let you carry both channels on one run instead. At 16AWG, this gauge is well suited to typical domestic cable runs. For longer runs, 14AWG is generally recommended, and for very long runs or low-impedance, high-power home cinema setups, 12AWG is the better choice. As an Eca-rated, LSNH cable, it's designed for fixed installation within walls and ceilings rather than for use with portable or exposed wiring. It's available cut to length from the drum in 10m, 20m, 30m or 50m lengths.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eWebro\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCores\u003c\/td\u003e\n\u003ctd\u003e2 (2-core, red\/black)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConductor size\u003c\/td\u003e\n\u003ctd\u003e16AWG (1.31mm²)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStranding\u003c\/td\u003e\n\u003ctd\u003e65\/0.16mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOverall diameter\u003c\/td\u003e\n\u003ctd\u003e6.1mm ±0.2mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConductor DC resistance\u003c\/td\u003e\n\u003ctd\u003e≤13.3 Ω\/km\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConductor material\u003c\/td\u003e\n\u003ctd\u003e99.999% oxygen-free plain copper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInsulation and sheath\u003c\/td\u003e\n\u003ctd\u003eLow Smoke Non-Halogen (LSNH), violet sheath\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCPR classification\u003c\/td\u003e\n\u003ctd\u003eEca to BS EN 50575 (UKCA)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlame retardancy\u003c\/td\u003e\n\u003ctd\u003eBS EN 60332-1-2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLow smoke\u003c\/td\u003e\n\u003ctd\u003eBS EN 61034-2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHalogen gas\u003c\/td\u003e\n\u003ctd\u003eBS EN 60754-1\u0026amp;2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage rating\u003c\/td\u003e\n\u003ctd\u003e300\/300V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTemperature range (fixed)\u003c\/td\u003e\n\u003ctd\u003e-20°C to +70°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBend radius\u003c\/td\u003e\n\u003ctd\u003e15 x overall diameter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompliance\u003c\/td\u003e\n\u003ctd\u003eRoHS 3 and REACH compliant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupply format\u003c\/td\u003e\n\u003ctd\u003eCut to length from the drum (10m, 20m, 30m or 50m)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Webro","offers":[{"title":"10m","offer_id":55370052665683,"sku":"WEB-162-10M","price":15.0,"currency_code":"GBP","in_stock":true},{"title":"20m","offer_id":55370052698451,"sku":"WEB-162-20M","price":26.0,"currency_code":"GBP","in_stock":true},{"title":"30m","offer_id":55370052731219,"sku":"WEB-162-30M","price":36.0,"currency_code":"GBP","in_stock":true},{"title":"50m","offer_id":55370052763987,"sku":"WEB-162-50M","price":59.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1115\/1323\/9891\/files\/webro-speaker-cable.jpg?v=1791981719"},{"product_id":"webro-16-4-speaker-cable-4-core-16awg-1-31mm2-lsnh-violet","title":"Webro 16\/4 Speaker Cable, 4 Core 16AWG (1.31mm²) LSNH Violet","description":"\u003cp\u003eThe Webro 16\/4 Speaker Cable is a 4-core, 16AWG installation cable designed for permanently installed audio systems. Its four-core construction lets you carry both left and right channels, or feed two separate speakers, from a single run, making it a practical choice for anyone wiring in-ceiling or in-wall speaker systems.\u003c\/p\u003e\u003ch3\u003eWhy we like it\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e4-core design allows one cable to serve two speakers or a stereo pair, simplifying cable runs\u003c\/li\u003e\n\u003cli\u003e99.999% oxygen-free plain copper conductors for reliable signal transfer\u003c\/li\u003e\n\u003cli\u003eLow Smoke Non-Halogen (LSNH) insulation and sheath, built for safety-conscious fixed installations\u003c\/li\u003e\n\u003cli\u003eUKCA CPR classified Eca to BS EN 50575, with flame retardant, low smoke and low halogen gas performance to BS EN 60332-1-2, BS EN 61034-2 and BS EN 60754-1\u0026amp;2\u003c\/li\u003e\n\u003cli\u003eRoHS 3 and REACH compliant, supplied cut to length from the drum for the quantity you need\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003eThis 16AWG (1.31mm²) cable suits typical domestic speaker runs. As a general guide, 16AWG is appropriate for standard room-length runs, 14AWG is better suited to longer runs, and 12AWG is recommended for very long runs or low-impedance, high-power home cinema setups. Because this is CPR Eca-rated LSNH cable, it is designed for fixed installation behind walls and within ceiling voids. With its 4-core construction, one length can supply a stereo pair or two separate speakers; for single-speaker runs, a 2-core cable would be used instead. It is supplied cut to length from the drum in 10m, 20m, 30m or 50m lengths.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003eCores\u003c\/td\u003e\n\u003ctd\u003e4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConductor size\u003c\/td\u003e\n\u003ctd\u003e16AWG (1.31mm²)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStranding\u003c\/td\u003e\n\u003ctd\u003e65\/0.16mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOverall diameter\u003c\/td\u003e\n\u003ctd\u003e7.0mm ±0.2mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConductor DC resistance\u003c\/td\u003e\n\u003ctd\u003e≤13.3 Ω\/km\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConductor material\u003c\/td\u003e\n\u003ctd\u003e99.999% oxygen-free plain copper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInsulation\/sheath\u003c\/td\u003e\n\u003ctd\u003eLow Smoke Non-Halogen (LSNH), violet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCPR classification\u003c\/td\u003e\n\u003ctd\u003eEca to BS EN 50575\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlame retardancy\u003c\/td\u003e\n\u003ctd\u003eBS EN 60332-1-2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLow smoke\u003c\/td\u003e\n\u003ctd\u003eBS EN 61034-2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHalogen gas\u003c\/td\u003e\n\u003ctd\u003eBS EN 60754-1\u0026amp;2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage rating\u003c\/td\u003e\n\u003ctd\u003e300\/300V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTemperature range (fixed)\u003c\/td\u003e\n\u003ctd\u003e-20C to +70C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBend radius\u003c\/td\u003e\n\u003ctd\u003e15 x overall diameter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompliance\u003c\/td\u003e\n\u003ctd\u003eRoHS 3, REACH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupply lengths\u003c\/td\u003e\n\u003ctd\u003e10m, 20m, 30m or 50m, cut from the drum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Webro","offers":[{"title":"10m","offer_id":55370052960595,"sku":"WEB-164-10M","price":27.0,"currency_code":"GBP","in_stock":true},{"title":"20m","offer_id":55370052993363,"sku":"WEB-164-20M","price":49.0,"currency_code":"GBP","in_stock":true},{"title":"30m","offer_id":55370053026131,"sku":"WEB-164-30M","price":69.0,"currency_code":"GBP","in_stock":true},{"title":"50m","offer_id":55370053058899,"sku":"WEB-164-50M","price":99.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1115\/1323\/9891\/files\/webro-speaker-cable_1d15ccac-a89b-4354-a534-b8fb7112ffde.jpg?v=1791981720"},{"product_id":"webro-14-2-speaker-cable-2-core-14awg-2-11mm2-lsnh-violet","title":"Webro 14\/2 Speaker Cable, 2 Core 14AWG (2.11mm²) LSNH Violet","description":"\u003cp\u003eThe Webro 14\/2 Speaker Cable is a 2-core, 14AWG installation cable designed for permanent fixed-wiring applications in walls and ceilings. It suits anyone installing ceiling or in-wall speakers over longer cable runs, where a heavier gauge than standard 16AWG is needed to maintain performance.\u003c\/p\u003e\u003ch3\u003eWhy we like it\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e99.999% oxygen-free plain copper conductors for a high-purity signal path\u003c\/li\u003e\n\u003cli\u003eLow Smoke Non-Halogen (LSNH) insulation and sheath, suited to fixed installation\u003c\/li\u003e\n\u003cli\u003eUKCA CPR classification Eca to BS EN 50575, intended for use in walls and ceilings\u003c\/li\u003e\n\u003cli\u003eFlame retardant to BS EN 60332-1-2, with low smoke and halogen gas emissions tested to BS EN 61034-2 and BS EN 60754-1\u0026amp;2\u003c\/li\u003e\n\u003cli\u003eSupplied cut to length from the drum, so you only need order the length required\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003eThis is a 2-core cable, so you will need one length per speaker; if you are wiring a stereo pair or two speakers from a single run, a 4-core cable would allow both channels to share one cable instead. As a general guide, 16AWG cable is suitable for typical domestic runs, 14AWG such as this is better suited to longer runs, and 12AWG is recommended for very long runs or low-impedance, high-power home cinema setups. The Eca\/LSNH construction of this cable is designed specifically for fixed installation behind walls and ceilings rather than portable or decorative use. It is supplied cut to length from the drum in 10m, 20m, 30m or 50m lengths.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003eCores\u003c\/td\u003e\n\u003ctd\u003e2 (red\/black)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConductor\u003c\/td\u003e\n\u003ctd\u003e99.999% oxygen-free plain copper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConductor size\u003c\/td\u003e\n\u003ctd\u003e14AWG (2.11mm²)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStranding\u003c\/td\u003e\n\u003ctd\u003e105\/0.16mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOverall diameter\u003c\/td\u003e\n\u003ctd\u003e7.1mm ±0.2mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConductor DC resistance\u003c\/td\u003e\n\u003ctd\u003e≤8.6 Ω\/km\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInsulation\/sheath\u003c\/td\u003e\n\u003ctd\u003eLow Smoke Non-Halogen (LSNH), violet sheath\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCPR classification\u003c\/td\u003e\n\u003ctd\u003eEca to BS EN 50575 (UKCA)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlame retardancy\u003c\/td\u003e\n\u003ctd\u003eBS EN 60332-1-2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLow smoke\u003c\/td\u003e\n\u003ctd\u003eBS EN 61034-2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHalogen gas\u003c\/td\u003e\n\u003ctd\u003eBS EN 60754-1\u0026amp;2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage rating\u003c\/td\u003e\n\u003ctd\u003e300\/300V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTemperature range (fixed)\u003c\/td\u003e\n\u003ctd\u003e-20°C to +70°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBend radius\u003c\/td\u003e\n\u003ctd\u003e15 x overall diameter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompliance\u003c\/td\u003e\n\u003ctd\u003eRoHS 3 and REACH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupply lengths\u003c\/td\u003e\n\u003ctd\u003e10m, 20m, 30m or 50m, cut from drum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Webro","offers":[{"title":"10m","offer_id":55370053976403,"sku":"WEB-142-10M","price":25.0,"currency_code":"GBP","in_stock":true},{"title":"20m","offer_id":55370054009171,"sku":"WEB-142-20M","price":45.0,"currency_code":"GBP","in_stock":true},{"title":"30m","offer_id":55370054041939,"sku":"WEB-142-30M","price":59.0,"currency_code":"GBP","in_stock":true},{"title":"50m","offer_id":55370054074707,"sku":"WEB-142-50M","price":95.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1115\/1323\/9891\/files\/webro-speaker-cable_2a2326e0-2105-4c18-bc4a-37f694567fa1.jpg?v=1791981721"},{"product_id":"webro-14-4-speaker-cable-4-core-14awg-2-11mm2-lsnh-violet","title":"Webro 14\/4 Speaker Cable, 4 Core 14AWG (2.11mm²) LSNH Violet","description":"\u003cp\u003eWebro 14\/4 is a 4-core, 14AWG installation speaker cable designed for permanent fixed wiring behind walls and ceilings. It's a good choice for anyone running stereo pairs or two speakers from a single cable run, particularly where longer cable lengths are needed between amplifier and speakers.\u003c\/p\u003e\u003ch3\u003eWhy we like it\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e14AWG (2.11mm²) copper conductors, suited to longer speaker runs where a lighter gauge would introduce excessive resistance\u003c\/li\u003e\n\u003cli\u003e4-core construction allows left and right channels, or two separate speakers, to be wired from one cable\u003c\/li\u003e\n\u003cli\u003e99.999% oxygen-free plain copper conductors for consistent signal transfer\u003c\/li\u003e\n\u003cli\u003eLSNH (Low Smoke, Non-Halogen) insulation and sheath, classified Eca to BS EN 50575 for fixed installation use\u003c\/li\u003e\n\u003cli\u003eSupplied cut to length from the drum, so you only take what the run requires\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003eThis cable suits ceiling and in-wall speaker installations where a single 4-core run is being used to feed two speakers or a stereo pair, saving a second cable run back to the amplifier position. As a general guide, 16AWG is adequate for typical domestic runs, 14AWG (as here) is recommended for longer runs, and 12AWG is best reserved for very long runs or low-impedance, high-power home cinema setups. Because this is Eca-rated LSNH cable, it's designed specifically for fixed installation within walls, ceilings and voids rather than for portable or exposed use. Available cut to length in 10m, 20m, 30m or 50m lengths.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eWebro\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCores\u003c\/td\u003e\n\u003ctd\u003e4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConductor size\u003c\/td\u003e\n\u003ctd\u003e14AWG (2.11mm²)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStranding\u003c\/td\u003e\n\u003ctd\u003e105\/0.16mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOverall diameter\u003c\/td\u003e\n\u003ctd\u003e9.0mm ±0.2mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConductor material\u003c\/td\u003e\n\u003ctd\u003e99.999% oxygen-free plain copper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInsulation\/sheath\u003c\/td\u003e\n\u003ctd\u003eLow Smoke Non-Halogen (LSNH), violet sheath\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCPR classification\u003c\/td\u003e\n\u003ctd\u003eEca to BS EN 50575 (UKCA)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlame retardancy\u003c\/td\u003e\n\u003ctd\u003eBS EN 60332-1-2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLow smoke\u003c\/td\u003e\n\u003ctd\u003eBS EN 61034-2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHalogen gas\u003c\/td\u003e\n\u003ctd\u003eBS EN 60754-1\u0026amp;2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage rating\u003c\/td\u003e\n\u003ctd\u003e300\/300V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTemperature range (fixed)\u003c\/td\u003e\n\u003ctd\u003e-20°C to +70°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBend radius\u003c\/td\u003e\n\u003ctd\u003e15 x overall diameter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompliance\u003c\/td\u003e\n\u003ctd\u003eRoHS 3, REACH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupply format\u003c\/td\u003e\n\u003ctd\u003eCut to length: 10m, 20m, 30m or 50m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Webro","offers":[{"title":"10m","offer_id":55370054992211,"sku":"WEB-144-10M","price":49.0,"currency_code":"GBP","in_stock":true},{"title":"20m","offer_id":55370055024979,"sku":"WEB-144-20M","price":79.0,"currency_code":"GBP","in_stock":true},{"title":"30m","offer_id":55370055057747,"sku":"WEB-144-30M","price":109.0,"currency_code":"GBP","in_stock":true},{"title":"50m","offer_id":55370055090515,"sku":"WEB-144-50M","price":169.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1115\/1323\/9891\/files\/webro-speaker-cable_28e1aa0f-951b-49d0-8a32-e905a3837c29.jpg?v=1791981722"},{"product_id":"webro-12-2-speaker-cable-2-core-12awg-3-19mm2-lsnh-violet","title":"Webro 12\/2 Speaker Cable, 2 Core 12AWG (3.19mm²) LSNH Violet","description":"\u003cp\u003eThis is Webro 12\/2 installation speaker cable, a heavy-gauge 2-core cable in 12AWG (3.19mm²) with a violet Low Smoke Non-Halogen (LSNH) sheath. It is intended for anyone wiring fixed in-wall or in-ceiling speaker systems where longer cable runs or low-impedance, high-power home cinema setups demand a thicker conductor than standard domestic cable.\u003c\/p\u003e\n\u003ch3\u003eWhy we like it\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e12AWG (3.19mm²) conductor size, suited to long cable runs or demanding, low-impedance\/high-power applications\u003c\/li\u003e\n\u003cli\u003e99.999% oxygen-free plain copper conductor with 65\/0.25mm stranding for good conductivity and flexibility\u003c\/li\u003e\n\u003cli\u003eLSNH insulation and sheath, built for safer fixed installation behind walls and ceilings\u003c\/li\u003e\n\u003cli\u003eUKCA CPR classified Eca to BS EN 50575, with flame retardancy, low smoke and low halogen gas emission certified to BS EN 60332-1-2, BS EN 61034-2 and BS EN 60754-1\u0026amp;2\u003c\/li\u003e\n\u003cli\u003eRoHS 3 and REACH compliant, and supplied cut to length from the drum so you only take what you need\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\n\u003cp\u003eThis is a 2-core cable, so you will need one run per speaker; for stereo pairs or two speakers from a single cable, a 4-core alternative would be required instead. As a general guide, 16AWG cable suits typical domestic runs, 14AWG is better for longer runs, and 12AWG cable such as this is recommended for very long runs or for low-impedance, high-power home cinema systems. LSNH cable of this type is designed specifically for fixed installation in walls and ceilings. It is supplied cut to length from the drum in 10m, 20m, 30m or 50m lengths.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eWebro\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct\u003c\/td\u003e\n\u003ctd\u003e12\/2 Speaker Cable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCores\u003c\/td\u003e\n\u003ctd\u003e2 (red\/black)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConductor size\u003c\/td\u003e\n\u003ctd\u003e12AWG (3.19mm²)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStranding\u003c\/td\u003e\n\u003ctd\u003e65\/0.25mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConductor material\u003c\/td\u003e\n\u003ctd\u003e99.999% oxygen-free plain copper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInsulation\/sheath\u003c\/td\u003e\n\u003ctd\u003eLow Smoke Non-Halogen (LSNH), violet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOverall diameter\u003c\/td\u003e\n\u003ctd\u003e8.8mm ±0.2mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConductor DC resistance\u003c\/td\u003e\n\u003ctd\u003e≤5.4 Ω\/km\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage rating\u003c\/td\u003e\n\u003ctd\u003e300\/300V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTemperature range (fixed)\u003c\/td\u003e\n\u003ctd\u003e-20°C to +70°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBend radius\u003c\/td\u003e\n\u003ctd\u003e15 x overall diameter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCPR classification\u003c\/td\u003e\n\u003ctd\u003eEca (UKCA, to BS EN 50575)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlame retardancy\u003c\/td\u003e\n\u003ctd\u003eBS EN 60332-1-2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLow smoke\u003c\/td\u003e\n\u003ctd\u003eBS EN 61034-2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHalogen gas\u003c\/td\u003e\n\u003ctd\u003eBS EN 60754-1\u0026amp;2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompliance\u003c\/td\u003e\n\u003ctd\u003eRoHS 3, REACH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupplied length\u003c\/td\u003e\n\u003ctd\u003eCut to length: 10m, 20m, 30m or 50m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n","brand":"Webro","offers":[{"title":"10m","offer_id":55370055909715,"sku":"WEB-122-10M","price":37.0,"currency_code":"GBP","in_stock":true},{"title":"20m","offer_id":55370055942483,"sku":"WEB-122-20M","price":69.0,"currency_code":"GBP","in_stock":true},{"title":"30m","offer_id":55370055975251,"sku":"WEB-122-30M","price":89.0,"currency_code":"GBP","in_stock":true},{"title":"50m","offer_id":55370056008019,"sku":"WEB-122-50M","price":139.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1115\/1323\/9891\/files\/webro-speaker-cable_8ce3ee3d-818b-4a46-9037-b83590c6d871.jpg?v=1791981725"},{"product_id":"webro-12-4-speaker-cable-4-core-12awg-3-19mm2-lsnh-violet","title":"Webro 12\/4 Speaker Cable, 4 Core 12AWG (3.19mm²) LSNH Violet","description":"\u003cp\u003eWebro 12\/4 is a heavy-gauge, four-core installation speaker cable built for longer or more demanding runs, where low cable resistance matters. With 99.999% oxygen-free plain copper conductors and a low smoke, non-halogen (LSNH) sheath, it suits custom installers and home cinema enthusiasts fitting cable behind walls or ceilings on multi-room or high-power systems.\u003c\/p\u003e\u003ch3\u003eWhy we like it\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e12AWG (3.19mm²) conductors for longer cable runs and low-impedance or high-power home cinema applications\u003c\/li\u003e\n\u003cli\u003eFour-core construction allows left and right channels, or two separate speakers, to be run from a single cable\u003c\/li\u003e\n\u003cli\u003e99.999% oxygen-free plain copper conductors throughout\u003c\/li\u003e\n\u003cli\u003eLSNH (Low Smoke Non-Halogen) insulation and sheath, classified Eca under CPR to BS EN 50575 for fixed installation\u003c\/li\u003e\n\u003cli\u003eRoHS 3 and REACH compliant, with flame retardancy, low smoke and halogen gas performance tested to recognised BS EN standards\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003eAs a general guide, 16AWG cable suits typical domestic speaker runs, 14AWG is better suited to longer runs, and 12AWG such as this Webro 12\/4 is recommended for very long runs or for low-impedance, high-power home cinema setups. CPR Eca\/LSNH cable of this type is designed specifically for fixed installation within walls and ceilings. The 4-core format means one cable can feed a stereo pair or two individual speakers, so plan one length per pair (or per two speakers) rather than one cable per speaker. Supplied cut to length from the drum in 10m, 20m, 30m or 50m lengths.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003eCores\u003c\/td\u003e\n\u003ctd\u003e4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConductor size\u003c\/td\u003e\n\u003ctd\u003e12AWG (3.19mm²)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStranding\u003c\/td\u003e\n\u003ctd\u003e65\/0.25mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConductor material\u003c\/td\u003e\n\u003ctd\u003e99.999% oxygen-free plain copper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInsulation\/sheath\u003c\/td\u003e\n\u003ctd\u003eLow Smoke Non-Halogen (LSNH), violet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCPR classification\u003c\/td\u003e\n\u003ctd\u003eEca to BS EN 50575\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlame retardancy\u003c\/td\u003e\n\u003ctd\u003eBS EN 60332-1-2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLow smoke\u003c\/td\u003e\n\u003ctd\u003eBS EN 61034-2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHalogen gas\u003c\/td\u003e\n\u003ctd\u003eBS EN 60754-1\u0026amp;2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage rating\u003c\/td\u003e\n\u003ctd\u003e300\/300V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTemperature range (fixed)\u003c\/td\u003e\n\u003ctd\u003e-20°C to +70°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBend radius\u003c\/td\u003e\n\u003ctd\u003e15 x overall diameter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOverall diameter\u003c\/td\u003e\n\u003ctd\u003e11.0mm ±0.2mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConductor DC resistance\u003c\/td\u003e\n\u003ctd\u003e≤5.4 Ω\/km\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompliance\u003c\/td\u003e\n\u003ctd\u003eRoHS 3, REACH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupplied length\u003c\/td\u003e\n\u003ctd\u003eCut to length: 10m, 20m, 30m or 50m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Webro","offers":[{"title":"10m","offer_id":55370056597843,"sku":"WEB-124-10M","price":69.0,"currency_code":"GBP","in_stock":true},{"title":"20m","offer_id":55370056630611,"sku":"WEB-124-20M","price":119.0,"currency_code":"GBP","in_stock":true},{"title":"30m","offer_id":55370056663379,"sku":"WEB-124-30M","price":159.0,"currency_code":"GBP","in_stock":true},{"title":"50m","offer_id":55370056696147,"sku":"WEB-124-50M","price":249.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1115\/1323\/9891\/files\/webro-speaker-cable_b3e7533f-2772-4b31-8597-a7ce1a709505.jpg?v=1791981725"},{"product_id":"hoody-1-ceiling-speaker-fire-and-acoustic-hood-for-5-inch-7-inch-speakers","title":"HOODY 1 Ceiling Speaker Fire \u0026 Acoustic Hood for 5\"-7\" Speakers","description":"\u003cp\u003eThe HOODY 1 is a fire and acoustic hood designed to fit over the rear of an in-ceiling speaker, protecting the fire integrity of the ceiling and reducing sound transfer to the room above. It's intended for anyone installing 5\"-7\" in-ceiling speakers below a habitable room or an escape route, where building regulations require the ceiling's fire rating to be maintained, such as the ground-floor ceiling of a two-storey house.\u003c\/p\u003e\u003ch3\u003eWhy we like it\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eProvides up to 90 minutes of fire integrity, complying with BS EN 1363-1:2020 and exceeding Approved Document B and BS 476 Parts 21 \u0026amp; 23\u003c\/li\u003e\n\u003cli\u003eAlso complies with 18th Edition IET Wiring Regulations and is tested to EN 6069 (1997)\u003c\/li\u003e\n\u003cli\u003eIntumescent material expands under heat to seal the ceiling opening automatically\u003c\/li\u003e\n\u003cli\u003eIntegrated acoustic lining helps reduce sound travelling into the room above\u003c\/li\u003e\n\u003cli\u003eFitted entirely from below the ceiling through the speaker cut-out, with no tools required and no ongoing maintenance\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003eHOODY 1 is designed for 5 to 7 inch in-ceiling speakers with a cut-out of up to 190mm, and suits both plasterboard and suspended ceilings in new build or retrofit projects. It is sold individually, so one hood is needed per speaker fitted. If your speaker has a larger cut-out, the HOODY 2 is the appropriate alternative.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eHOODY 1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible speaker size\u003c\/td\u003e\n\u003ctd\u003e5 to 7 inch in-ceiling speakers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum cut-out size\u003c\/td\u003e\n\u003ctd\u003e190mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e265mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDepth\u003c\/td\u003e\n\u003ctd\u003e160mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.40kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFire integrity\u003c\/td\u003e\n\u003ctd\u003eUp to 90 minutes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompliance\u003c\/td\u003e\n\u003ctd\u003eBS EN 1363-1:2020, exceeds Approved Document B and BS 476 Parts 21 \u0026amp; 23, 18th Edition IET Wiring Regulations, tested to EN 6069 (1997)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eIntumescent material with acoustic lining\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstallation\u003c\/td\u003e\n\u003ctd\u003eFitted from below ceiling through speaker cut-out, no tools required, maintenance free\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSuitable ceilings\u003c\/td\u003e\n\u003ctd\u003ePlasterboard or suspended, new build or retrofit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eMade in the UK\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePatent\u003c\/td\u003e\n\u003ctd\u003eGB 2582544B\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSold as\u003c\/td\u003e\n\u003ctd\u003eIndividually, one hood per speaker\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"HOODY","offers":[{"title":"Default Title","offer_id":55370057122131,"sku":"HOODY1","price":55.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1115\/1323\/9891\/files\/HOODY1.jpg?v=1791981726"},{"product_id":"hoody-2-ceiling-speaker-fire-and-acoustic-hood-for-8-inch-10-inch-speakers","title":"HOODY 2 Ceiling Speaker Fire \u0026 Acoustic Hood for 8\"-10\" Speakers","description":"\u003cp\u003eThe HOODY 2 is a fire and acoustic hood designed to fit over the back of an in-ceiling speaker, for use with 8\"-10\" round or rectangular models. It's intended for anyone installing in-ceiling speakers below a habitable room or an escape route, where building regulations require the fire rating of the ceiling to be maintained.\u003c\/p\u003e\u003ch3\u003eWhy we like it\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eProvides up to 90 minutes of fire integrity\u003c\/li\u003e\n\u003cli\u003eComplies with BS EN 1363-1:2020, exceeding the requirements of Approved Document B and BS 476 Parts 21 \u0026amp; 23\u003c\/li\u003e\n\u003cli\u003eComplies with the 18th Edition IET Wiring Regulations and is tested to EN 6069 (1997)\u003c\/li\u003e\n\u003cli\u003eIntumescent material expands under heat to seal the ceiling opening, while the acoustic lining helps reduce sound transfer to the room above\u003c\/li\u003e\n\u003cli\u003eFits from below the ceiling through the speaker cut-out, with no tools required and no ongoing maintenance\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003eThe HOODY 2 is sized for 8 to 10 inch (203-254mm) round or rectangular in-ceiling speakers, with cut-outs up to 250mm. You'll need one hood per speaker, fitted individually over each one. It suits both plasterboard and suspended ceilings, and is equally suitable for new-build projects or retrofitting to existing installations, such as the ground-floor ceiling of a two-storey house where fire separation must be preserved.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eHOODY 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpeaker compatibility\u003c\/td\u003e\n\u003ctd\u003e8\"-10\" (203-254mm) round or rectangular in-ceiling speakers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum cut-out\u003c\/td\u003e\n\u003ctd\u003e250mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFire integrity\u003c\/td\u003e\n\u003ctd\u003eUp to 90 minutes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompliance\u003c\/td\u003e\n\u003ctd\u003eBS EN 1363-1:2020; exceeds Approved Document B and BS 476 Parts 21 \u0026amp; 23; 18th Edition IET Wiring Regulations; tested to EN 6069 (1997)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e335mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDepth\u003c\/td\u003e\n\u003ctd\u003e180mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003eApprox 0.3kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eMade in the UK\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePatent\u003c\/td\u003e\n\u003ctd\u003eGB 2582544B\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSold as\u003c\/td\u003e\n\u003ctd\u003eIndividually (one hood per speaker)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"HOODY","offers":[{"title":"Default Title","offer_id":55370058137939,"sku":"HOODY2","price":68.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1115\/1323\/9891\/files\/HOODY2.jpg?v=1791981726"},{"product_id":"monitor-audio-cs-fh-fire-hood-for-small-in-ceiling-speakers","title":"Monitor Audio CS-FH Fire Hood for Small In-Ceiling Speakers","description":"\u003cp\u003eThe Monitor Audio CS-FH is a fire and acoustic hood designed to fit over the rear of a small in-ceiling speaker, maintaining the fire integrity of the ceiling it's installed in. It's intended for anyone fitting in-ceiling speakers below habitable rooms or escape routes, such as the ground-floor ceiling of a two-storey house, where building regulations require the ceiling's fire rating to be preserved.\u003c\/p\u003e\n\u003ch3\u003eWhy we like it\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eProvides up to 90 minutes of fire integrity\u003c\/li\u003e\n\u003cli\u003eComplies with BS EN 1363-1:2020, exceeding the requirements of Approved Document B and BS 476 Parts 21 \u0026amp; 23\u003c\/li\u003e\n\u003cli\u003eComplies with the 18th Edition IET Wiring Regulations and is tested to EN 6069 (1997)\u003c\/li\u003e\n\u003cli\u003eIntumescent material expands under heat to seal the opening around the speaker\u003c\/li\u003e\n\u003cli\u003eAcoustic lining helps reduce sound transfer to the room above\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\n\u003cp\u003eThe CS-FH is compatible with the Monitor Audio C1S and C2S, and will also suit other small in-ceiling speakers that fit its dimensions. It's fitted around the rear of the speaker before installation, using the supplied push-pin fixings, and suits plasterboard or suspended ceilings in either new build or retrofit projects. One hood is required per speaker, and it is sold individually, so order one per speaker location. Made in the UK.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eMonitor Audio\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eCS-FH Fire Hood\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFire integrity\u003c\/td\u003e\n\u003ctd\u003eUp to 90 minutes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompliance\u003c\/td\u003e\n\u003ctd\u003eBS EN 1363-1:2020, exceeds Approved Document B and BS 476 Parts 21 \u0026amp; 23; complies with 18th Edition IET Wiring Regulations; tested to EN 6069 (1997)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eExternal dimensions (H x W x D)\u003c\/td\u003e\n\u003ctd\u003e265 x 265 x 160mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFixings\u003c\/td\u003e\n\u003ctd\u003ePush-pin fixings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatibility\u003c\/td\u003e\n\u003ctd\u003eMonitor Audio C1S, C2S; also suits other speakers matching the dimensions\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSuitable ceiling types\u003c\/td\u003e\n\u003ctd\u003ePlasterboard or suspended ceilings, new build or retrofit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCountry of manufacture\u003c\/td\u003e\n\u003ctd\u003eMade in the UK\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSold as\u003c\/td\u003e\n\u003ctd\u003eIndividually\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Monitor Audio","offers":[{"title":"Default Title","offer_id":55370058826067,"sku":"CS-FH","price":65.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1115\/1323\/9891\/files\/ma_cs-fh.jpg?v=1791981727"},{"product_id":"monitor-audio-cml-fh-fire-hood-for-medium-and-large-in-ceiling-speakers","title":"Monitor Audio CML-FH Fire Hood for Medium \u0026 Large In-Ceiling Speakers","description":"\u003cp\u003eThe Monitor Audio CML-FH is a fire and acoustic hood designed to fit over the back of a medium or large in-ceiling speaker, maintaining the fire integrity of the ceiling above. It is intended for anyone installing in-ceiling speakers below habitable rooms or escape routes, such as the ground-floor ceiling of a two-storey house, where building regulations require the ceiling's fire rating to be preserved.\u003c\/p\u003e\n\u003ch3\u003eWhy we like it\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eProvides up to 90 minutes of fire integrity when fitted correctly\u003c\/li\u003e\n\u003cli\u003eComplies with BS EN 1363-1:2020, exceeding the requirements of Approved Document B and BS 476 Parts 21 \u0026amp; 23\u003c\/li\u003e\n\u003cli\u003eMeets the 18th Edition IET Wiring Regulations and is tested to EN 6069 (1997)\u003c\/li\u003e\n\u003cli\u003eIntumescent material expands under heat to seal the ceiling opening, while the acoustic lining helps reduce sound transfer to the room above\u003c\/li\u003e\n\u003cli\u003eMade in the UK and suitable for both new-build and retrofit installations in plasterboard or suspended ceilings\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\n\u003cp\u003eThe CML-FH fits around the rear of the speaker before installation, secured with push-pin fixings, and is sold individually, so you will need one hood per speaker. It is compatible with Monitor Audio's Creator Series C1M, C2M, C2M-T2X, C2M-CP, C3M, C1L, C2L, C2L-T2X, C2L-CP, C2L-A, C3L, C3L-CP and C3L-A, as well as the Basics Series C165, C165-T2, C180, and the All-Weather Series AWC265, AWC265-T2, AWC280 and AWC280-T2. It will also suit other in-ceiling speakers that match its external dimensions.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eMonitor Audio\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eCML-FH Fire Hood\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFire Integrity\u003c\/td\u003e\n\u003ctd\u003eUp to 90 minutes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompliance\u003c\/td\u003e\n\u003ctd\u003eBS EN 1363-1:2020; exceeds Approved Document B and BS 476 Parts 21 \u0026amp; 23; 18th Edition IET Wiring Regulations; tested to EN 6069 (1997)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eIntumescent material with acoustic lining\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSuitable Ceiling Types\u003c\/td\u003e\n\u003ctd\u003ePlasterboard or suspended ceilings, new build or retrofit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFixings\u003c\/td\u003e\n\u003ctd\u003ePush-pin fixings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eExternal Dimensions (H x W x D)\u003c\/td\u003e\n\u003ctd\u003e335 x 335 x 180mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCountry of Manufacture\u003c\/td\u003e\n\u003ctd\u003eUK\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatibility\u003c\/td\u003e\n\u003ctd\u003eMonitor Audio C1M, C2M, C2M-T2X, C2M-CP, C3M, C1L, C2L, C2L-T2X, C2L-CP, C2L-A, C3L, C3L-CP, C3L-A, Basics C165, C165-T2, C180, All-Weather AWC265, AWC265-T2, AWC280, AWC280-T2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSold As\u003c\/td\u003e\n\u003ctd\u003eIndividually\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Monitor Audio","offers":[{"title":"Default Title","offer_id":55370059448659,"sku":"CML-FH","price":75.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1115\/1323\/9891\/files\/ma_cml-fh.jpg?v=1791981728"},{"product_id":"monitor-audio-wm-fh-fire-hood-for-medium-in-wall-speakers","title":"Monitor Audio WM-FH Fire Hood for Medium In-Wall Speakers","description":"\u003cp\u003eThe Monitor Audio WM-FH is a fire and acoustic hood designed to fit over the rear of a medium in-wall speaker, helping to maintain the fire integrity of a wall or ceiling where it has been breached for installation. It is intended for anyone fitting in-wall speakers below habitable rooms or escape routes, such as on the ground-floor ceiling of a two-storey house, where building regulations require the original fire rating to be preserved.\u003c\/p\u003e\n\u003ch3\u003eWhy we like it\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eProvides up to 90 minutes of fire integrity, complying with BS EN 1363-1:2020 and exceeding Approved Document B and BS 476 Parts 21 \u0026amp; 23\u003c\/li\u003e\n\u003cli\u003eAlso complies with 18th Edition IET Wiring Regulations and is tested to EN 6069 (1997)\u003c\/li\u003e\n\u003cli\u003eIntumescent material expands under heat to seal the opening around the speaker\u003c\/li\u003e\n\u003cli\u003eAcoustic lining helps reduce sound transmission to the room above\u003c\/li\u003e\n\u003cli\u003eMade in the UK and suited to both new build and retrofit plasterboard installations\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\n\u003cp\u003eThis hood is fitted around the rear of the speaker before installation, using the supplied push-pin fixings, and is compatible with the Monitor Audio W1M-E, W1M, W2M, W2M-CP and W3M medium in-wall speakers. One hood is required per speaker, so order one WM-FH for each in-wall speaker that needs to maintain fire integrity. It is sold individually and finished in black.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eMonitor Audio\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eCreator Series Fire Hood WM-FH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFire integrity\u003c\/td\u003e\n\u003ctd\u003eUp to 90 minutes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompliance\u003c\/td\u003e\n\u003ctd\u003eBS EN 1363-1:2020; exceeds Approved Document B and BS 476 Parts 21 \u0026amp; 23; 18th Edition IET Wiring Regulations; tested to EN 6069 (1997)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible speakers\u003c\/td\u003e\n\u003ctd\u003eMonitor Audio W1M-E, W1M, W2M, W2M-CP, W3M\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eExternal dimensions (H x W x D)\u003c\/td\u003e\n\u003ctd\u003e615 x 286 x 85mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFixings\u003c\/td\u003e\n\u003ctd\u003ePush-pin fixings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWall type\u003c\/td\u003e\n\u003ctd\u003ePlasterboard, new build or retrofit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCountry of manufacture\u003c\/td\u003e\n\u003ctd\u003eUK\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSold as\u003c\/td\u003e\n\u003ctd\u003eIndividually\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n","brand":"Monitor Audio","offers":[{"title":"Default Title","offer_id":55370060136787,"sku":"WM-FH","price":120.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1115\/1323\/9891\/files\/ma_wm-fh.jpg?v=1791981729"},{"product_id":"monitor-audio-wl-fh-fire-hood-for-large-in-wall-speakers","title":"Monitor Audio WL-FH Fire Hood for Large In-Wall Speakers","description":"\u003cp\u003eThe Monitor Audio WL-FH Fire Hood is a fire and acoustic hood designed to fit over the rear of large in-wall speakers, maintaining the fire integrity of walls where required by building regulations. It's intended for installers and homeowners fitting in-wall speakers into partition walls separating habitable rooms or escape routes, such as in new-build or retrofit projects.\u003c\/p\u003e\n\u003ch3\u003eWhy we like it\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eProvides up to 90 minutes of fire integrity, complying with BS EN 1363-1:2020 and exceeding the requirements of Approved Document B and BS 476 Parts 21 \u0026amp; 23\u003c\/li\u003e\n\u003cli\u003eMeets the 18th Edition IET Wiring Regulations and is tested to EN 6069 (1997)\u003c\/li\u003e\n\u003cli\u003eIntumescent material expands under heat to seal the opening around the speaker\u003c\/li\u003e\n\u003cli\u003eAcoustic lining helps reduce sound transfer to adjoining rooms\u003c\/li\u003e\n\u003cli\u003eMade in the UK, with straightforward push-pin fixings for installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\n\u003cp\u003eThis fire hood is compatible with Monitor Audio W1L, W2L and W3L large in-wall speakers and is fitted around the rear of the speaker before installation into plasterboard walls. Building regulations require the fire rating of a wall or ceiling to be maintained where speakers are installed in walls separating habitable rooms or escape routes, such as in a two-storey house. One fire hood is required per speaker, and the product is sold individually.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eMonitor Audio\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSeries\u003c\/td\u003e\n\u003ctd\u003eCreator Series\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eWL-FH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eFire and acoustic hood for in-wall speakers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatibility\u003c\/td\u003e\n\u003ctd\u003eMonitor Audio W1L, W2L, W3L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFire integrity\u003c\/td\u003e\n\u003ctd\u003eUp to 90 minutes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStandards compliance\u003c\/td\u003e\n\u003ctd\u003eBS EN 1363-1:2020; exceeds Approved Document B and BS 476 Parts 21 \u0026amp; 23; 18th Edition IET Wiring Regulations; tested to EN 6069 (1997)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eExternal dimensions (H x W x D)\u003c\/td\u003e\n\u003ctd\u003e968 x 290 x 85mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFixings\u003c\/td\u003e\n\u003ctd\u003ePush-pin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWall type\u003c\/td\u003e\n\u003ctd\u003ePlasterboard, new build or retrofit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufactured\u003c\/td\u003e\n\u003ctd\u003eUK\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSold as\u003c\/td\u003e\n\u003ctd\u003eIndividually\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Monitor Audio","offers":[{"title":"Default Title","offer_id":55370061480275,"sku":"WL-FH","price":150.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1115\/1323\/9891\/files\/ma_wl-fh.jpg?v=1791981731"},{"product_id":"qed-qx16-2-pe-outdoor-burial-speaker-cable-2-core-16awg-black","title":"QED QX16\/2 PE Outdoor Burial Speaker Cable, 2 Core 16AWG Black","description":"\u003cp\u003eThe QED Professional QX16\/2 PE is a 2 core, 16AWG outdoor speaker cable designed for direct burial without the need for additional conduit. It is intended for anyone installing garden or patio speakers who needs a cable that can run underground and withstand the elements.\u003c\/p\u003e\u003ch3\u003eWhy we like it\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDirect buriable with no conduit required, simplifying outdoor installation\u003c\/li\u003e\n\u003cli\u003eLarge cross-sectional area, high purity copper conductors help maintain performance over longer runs\u003c\/li\u003e\n\u003cli\u003eWater and UV resistant PE outer jacket, meeting or exceeding UV resistance ISO 4892-2\u003c\/li\u003e\n\u003cli\u003eSequential metre marking makes measuring and cutting runs straightforward\u003c\/li\u003e\n\u003cli\u003eColour-coded conductor sheaths (red and black) for easy, correct polarity connection\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003eThis cable is designed specifically for outdoor and garden speaker runs, such as across gardens and patios, and is suitable for direct burial. It is not LSZH, so it should not be used for runs inside the house; for indoor installation, an LSZH cable should be used instead. As a general guide, 16AWG cable such as this suits typical domestic-length runs; for longer outdoor runs, a heavier gauge such as 14AWG may be preferable to maintain performance, with 12AWG reserved for very long runs or low-impedance, high-power applications. The cable is supplied cut to length in 10m, 20m, 30m or 50m options, so you can select the length to suit the number of speakers and the distance from your amplifier.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003eConductor size\u003c\/td\u003e\n\u003ctd\u003e16 AWG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003e30\/0.26\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConductor resistance\u003c\/td\u003e\n\u003ctd\u003e13.3 ohm\/km\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCross-sectional area\u003c\/td\u003e\n\u003ctd\u003e2.0mm2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eJacket material\u003c\/td\u003e\n\u003ctd\u003ePE, black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutside diameter\u003c\/td\u003e\n\u003ctd\u003e6.20mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e58kg\/km\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUV resistance\u003c\/td\u003e\n\u003ctd\u003eMeets or exceeds ISO 4892-2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompliance\u003c\/td\u003e\n\u003ctd\u003eRoHS2 compliant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupplied lengths\u003c\/td\u003e\n\u003ctd\u003e10m, 20m, 30m or 50m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"QED","offers":[{"title":"10m","offer_id":55421297918291,"sku":"QE4155-10M","price":15.0,"currency_code":"GBP","in_stock":true},{"title":"20m","offer_id":55421297951059,"sku":"QE4155-20M","price":29.0,"currency_code":"GBP","in_stock":true},{"title":"30m","offer_id":55421297983827,"sku":"QE4155-30M","price":44.0,"currency_code":"GBP","in_stock":true},{"title":"50m","offer_id":55421298016595,"sku":"QE4155-50M","price":72.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1115\/1323\/9891\/files\/QE4155.jpg?v=1792139443"}],"url":"https:\/\/www.ceiling-speakers.co\/collections\/accessories.oembed","provider":"Ceiling Speaker Warehouse","version":"1.0","type":"link"}